One of the unique feature EN6200 carries which is used to assign a Public IP directly to a server behind firewall without compromising the security of the network. For example VoIP or call loggers won’t work behind Firewall via NAT-ed network this feature is very much useful to configure a public IP with Firewall enabled option to protect the network thus meeting the server requirements as well.
Below steps shall be followed to configure IP-passthrough on a K7 Security UTM appliance.
Steps to be followed:
1: Login to K7 Security UTM, and Click on Configuration
2: Click on IP Passthrough
3: Under Wan to Internal IP passthrough Rules click on > Add
4: Select the interface you public IP published and select LAN interface you connect the server.
5: If you want to bypass the firewall for that server > enable the service
6: After making the necessary configuration, Click Save and Restart Service
Note: In both the above condition, No “IP alias” should be configured for the public static IP (to be configured) on local system.
If the issue persists or you need any assistance, you may raise ticket at Submit a Ticket and Our Support Team will get in touch with you shortly to assist you.