0
(0)

Solution

Prior to enabling WWWI, you must import or replace your license file

For instructions, see the following ESET Knowledgebase article: How do I replace my existing license with a new one in ESET Server Security for Linux?

To activate the Web Interface of ESET Server Security for Linux, follow the steps below:

  1. Open the configuration file (with root permissions) in a text editor.
    root@machine:~$ vi /etc/opt/eset/esets/esets.cfg
  2. Find the [wwwi] by scrolling or searching. Each line is commented with detailed instructions for use.
  3. Enable the [wwwi] agent.
    agent_enabled = yes
  4. Specify the listening address to 0.0.0.0 to listen on all interfaces. If you would like to constrain the service to one specific interface, set that IP address as your listening address.
    listen_addr = "0.0.0.0"
  5. Specify the listening port to a port number of your choice. We recommend selecting a port greater than 1024 and recommend avoiding port 80 for security reasons.
    listen_port = 2220
  6. Specify a username and password of your choice (username and password are required to access the interface). Do not use your ESET Security username or password or the root password for your system. Without setting a username and password, daemon will not start.
    username = "username"
    password = "password"
  7. Save the configuration file and exit.
  8. Restart the esets_daemon to start the Web Interface.
    root@machine:~$ sudo /etc/init.d/esets restart

    Verify that the Web Interface daemon is running:

    root@machine:~$ ps -e | grep esets
    5443 ?     00:00:00 esets_daemon
    5444 ?     00:00:11 esets_daemon
    5447 ?     00:00:02 esets_wwwi
    Web Interface

    The presence of esets_wwwi in the output of the process status indicates that the Web Interface is running.
    To verify if the daemon is listening on port 2220:

    netstat -an | grep LISTEN | grep 2220
  9. Navigate to https://localhost:2220 (where 2220 is the listen port you set in step 5) in your web browser to test it. If your browser displays a security certificate warning, accept the website certificate.

Figure 1-1
Click the image to view larger in new window

  1. To log onto the Web Interface, enter the username/password that you specified in the configuration file /etc/opt/eset/esets/esets.cfg (see step 6) in the appropriate fields and log in.

Figure 1-2
Click the image to view larger in new window

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

(Visited 31 times, 1 visits today)